Why we launched water in fuel level sensor

The water in fuel level sensor is specially designed for the measurement of the water in the fuel tanks. Moisture is the second largest pollutant in oil systems (after particulate pollution). Moisture is extremely destructive to the life of machinery and oils. Also it will damage engine parts, cylinders, bearings, etc., which will lead to mechanical failure, and costly maintenance and downtime costs. All those will cause huge losses to the enterprise.

How water in fuel level sensor works?

To know the way water in fuel level sensor works, we should know that when the water content in the oil reaches the saturation point, the excess water will form a significant oil-water layer, which will be precipitated in the state of free water. Since most oils are less dense than water, the water layer usually settles beneath the oil layer. As long as the water in fuel level sensor is installed at the bottom of the measurement tank and then connected to the control room, the height of the water level in the oil can be monitored. Based on the monitoring data, the manager opens the waterproof valve at the bottom of the oil tank for waterproof treatment. This will not only ensure the quality of oil products, but also improve management efficiency.

The features of HOLYKELL® water in fuel level sensor

The water in fuel level sensor not only helps managers clear the accumulated water in the oil tank in time, but also can be used for oil and water level detection. It is a highly comprehensive liquid level measuring instrument. If you have trouble in water in fuel detecting, please contact us, we will give technical solutions.